Everything below concerns HPLC. We keep the language plain, cite what the science says, and separate well-supported claims from open questions.
Updated 2026-03-19. Numbers and descriptions here follow the published literature rather than marketing material.
Creatine was first identified in skeletal muscle extracts in the nineteenth century, and its role in phosphagen energy buffering was clarified in the twentieth century. The monohydrate salt became widely studied after methods for inexpensive synthesis and crystallization were developed. Modern research examines its effects on muscle energetics, recovery, and cognitive performance under specific conditions. Findings vary with population, exercise protocol, baseline creatine status, and measurement method. Studies often compare supplementation with placebo during controlled training or testing schedules.
Creatine monohydrate is a hydrated form of creatine, a nitrogen-containing compound involved in cellular energy metabolism. Its molecular formula is C4H9N3O2·H2O, with a molar mass around 149.15 g/mol. The monohydrate is the most common solid form used in research and commercial settings because it crystallizes readily and remains stable under ordinary conditions. The term monohydrate indicates one water molecule per creatine molecule in the crystal lattice. It appears as a white crystalline powder with low odor.
In the body, creatine is synthesized from arginine, glycine, and methionine, mainly in the liver and kidneys, and is also obtained from foods such as meat and fish. About 95% of body creatine is stored in skeletal muscle, where a fraction is phosphorylated to phosphocreatine. Phosphocreatine serves as a rapid reserve of high-energy phosphate for short bursts of ATP regeneration. The monohydrate form supplies creatine after dissolution and absorption, but it is not itself the active phosphorylated species.
Identity and purity are assessed with several complementary methods. High-performance liquid chromatography can separate creatine from creatinine and related impurities, often with ultraviolet detection. Nuclear magnetic resonance and infrared spectroscopy provide structural confirmation, while Karl Fischer titration measures water content. Elemental analysis and mass spectrometry may be used for additional confirmation, especially in research or forensic settings. No single method captures every quality attribute, so laboratories typically combine results and compare them against a specification.
Creatine monohydrate is sold as a dietary ingredient in some countries and as a food supplement in others. Regulatory frameworks vary, so purity limits, labeling rules, and permitted claims are not globally uniform. In the United States, it falls under dietary supplement rules, whereas the European Union treats it as a food supplement ingredient. Pharmacopeial monographs, where they exist, can provide public quality standards, but not every product is required to meet them. Questions about long-term effects and patterns of use remain areas of active study rather than settled regulatory findings.
Solid creatine monohydrate is generally stable when kept cool and dry, but it can hydrolyze to creatinine over time. Moisture, heat, and acidic conditions accelerate this conversion, which reduces assay values and changes the material's properties. Creatinine is a cyclic dehydration product that is also a normal human metabolite, so its presence in a sample is not necessarily a health concern by itself. In quality testing, creatinine is monitored as a marker of degradation and purity.
| Property | Value | Notes |
|---|---|---|
| Molecular formula | C4H9N3O2·H2O | Creatine plus one water molecule in the crystal lattice. |
| Molar mass | 149.15 g/mol | Calculated for the monohydrate form. |
| Appearance | White crystalline powder | Typical solid form; particle size can vary by processing. |
| Solubility class | Sparingly soluble in water | Dissolution improves with time, stirring, and temperature. |
| Common synonyms | Creatine hydrate; N-carbamimidoyl-N-methylglycine monohydrate | Names vary by chemical registry and supplier. |
Creatine monohydrate is one of several solid forms of creatine described in the literature. Other forms include anhydrous creatine, creatine hydrochloride, and creatine ethyl ester, each with different solubility and stability characteristics. The monohydrate is distinct from creatinine, a spontaneous breakdown compound that forms when creatine loses water and cyclizes. Commercial descriptions sometimes use synonyms such as methylguanidoacetic acid or N-(aminoiminomethyl)-N-methylglycine, which refer to the same base molecule. These names appear in chemical databases and product labels.
Creatine monohydrate is a crystalline compound formed when one molecule of creatine binds with one molecule of water. Creatine itself is a nitrogen-containing organic acid involved in cellular energy transfer, particularly in muscle and nerve tissue. The monohydrate form is the most common solid form used in research and commercial products because it is relatively stable and easy to handle. Its molecular formula is C4H9N3O2·H2O, and its molar mass is about 149.15 grams per mole.
Analytical laboratories commonly identify creatine monohydrate by high-performance liquid chromatography with ultraviolet detection, often after dissolving the sample in water or dilute acid. Ion-exchange or reversed-phase columns separate creatine from creatinine and related guanidino compounds. Nitrogen content can be checked by Kjeldahl or combustion methods, while moisture is measured by Karl Fischer titration or loss on drying. These techniques give complementary views: chromatographic purity addresses related substances, whereas moisture and elemental data confirm hydrate stoichiometry. No single test defines quality by itself; a combination is used in specifications.
Storage recommendations generally emphasize a cool, dry place away from direct sunlight and strong oxidizers. Sealed containers limit humidity exchange, which helps prevent clumping and gradual conversion to creatinine. Long-term stability studies usually monitor appearance, moisture, and purity at intervals under defined temperature and humidity conditions. Accelerated tests at elevated temperature can reveal degradation pathways, but they do not perfectly predict room-temperature shelf life. Questions remain about how much creatinine formation is acceptable in different product categories and how packaging choices affect that rate over time.
Creatine monohydrate is a crystalline compound formed when one molecule of creatine associates with one molecule of water in the solid lattice. Its molecular formula is C4H11N3O3, and its molar mass is about 149.15 grams per mole. The material appears as a white, odorless powder that dissolves sparingly in water at room temperature. The monohydrate designation distinguishes it from anhydrous creatine, which lacks the bound water and has a lower molar mass. This hydrate is the most common commercial form of creatine used in nutritional and research settings.
Creatine is synthesized endogenously in humans, mainly in the liver, kidney, and pancreas, from the amino acids arginine, glycine, and methionine. Skeletal muscle stores much of the body's creatine, where it participates in the phosphocreatine system that buffers adenosine triphosphate during short, intense contractions. Dietary sources include meat and fish, so omnivorous diets provide additional creatine beyond endogenous production. Supplemental creatine monohydrate supplies the same molecule found in food and tissues, not a distinct drug or hormone. Research interest centers on its role in cellular energy transfer and its effects on muscle and other tissues.
Quality control of creatine monohydrate relies on a combination of identity, purity, and moisture tests. High-performance liquid chromatography with ultraviolet detection is widely used to separate creatine from creatinine and other related nitrogenous compounds. Spectroscopic methods such as infrared and nuclear magnetic resonance provide structural confirmation. Because the material is a hydrate, water content is measured separately, often by Karl Fischer titration. These tests together establish whether a lot meets a defined specification.
Manufacturing processes can leave trace amounts of dicyandiamide, creatinine, or residual solvents, depending on the synthetic route and purification steps. Heavy metals, arsenic, and microbial contamination are also monitored for food or pharmaceutical grades. Particle size distribution can affect dissolution behavior and blending uniformity, so it may be specified for certain applications. Analytical results are reported on a dry basis or as-is basis, and the difference matters when comparing certificates of analysis. Open questions remain about how minor impurities influence long-term stability under varied storage conditions.
Stability studies typically examine the effects of temperature, humidity, and light on creatine monohydrate. Sealed containers stored in cool, dry conditions help limit moisture uptake and hydrolysis. Elevated temperature and high relative humidity can accelerate conversion to creatinine, especially in aqueous solutions. In solid dosage forms, excipients and processing steps may also affect stability. Published stability data are not fully consistent across studies because test conditions and analytical methods vary.
The angiotensin II receptors, (ATR1) and (ATR2), are a class of G protein-coupled receptors with angiotensin II as their ligands. They are important in the renin–angiotensin system: they are responsible for the signal transduction of the vasoconstricting stimulus of the main effector hormone, angiotensin II. The AT1 and AT2 receptors share a sequence identity of ~30%, but have a similar affinity for angiotensin II, which is their main ligand. The AT1 receptor is the best elucidated angiotensin receptor. The AT1 subtype is found in the heart, blood vessels, kidney, adrenal cortex, lung and circumventricular organs of brain, basal ganglia, brainstem and mediates the vasoconstrictor effects. The angiotensin receptor is activated by the vasoconstricting peptide angiotensin II. The activated receptor in turn couples to Gq/11 and Gi/o and thus activates phospholipase C and increases the cytosolic Ca2+ concentrations, which in turn triggers cellular responses such as stimulation of protein kinase C. Activated receptor also inhibits adenylate cyclase and activates various tyrosine kinases.
It might occur either at the enzyme or receptor level. There are two possible outcomes at the enzyme level: competitive inhibition or enzyme activity reactivation. Ethyl alcohol or fomepizole used in methyl alcohol or ethylene glycol poisoning is a typical example of competitive enzyme inhibition. By posing competition for alcohol dehydrogenase (ADH) with methyl alcohol and ethylene glycol, these drugs reduce the production of harmful metabolites. For receptor level, the traditional antidotes include naloxone and flumazenil. Flumazenil functions as a competitive antagonist at the GABA-A receptor complex's benzodiazepine site. By doing this, the CNS and respiratory depression would reverse and the inward chloride current would reduce. Flumazenil is useful in treating and preventing benzodiazepine-induced coma from recurring.
An antitoxin is an antibody with the ability to neutralize a specific toxin. Antitoxins are produced by certain animals, plants, and bacteria in response to toxin exposure. Although they are most effective in neutralizing toxins, they can also kill bacteria and other microorganisms. Antitoxins are made within organisms, and can be injected into other organisms, including humans, to treat an infectious disease. This procedure involves injecting an animal with a safe amount of a particular toxin. The animal's body then makes the antitoxin needed to neutralize the toxin. Later, blood is withdrawn from the animal. When the antitoxin is obtained from the blood, it is purified and injected into a human or other animal, inducing temporary passive immunity. To prevent serum sickness, it is often best to use an antitoxin obtained from the same species (e.g. use human antitoxin to treat humans). Most antitoxin preparations are prepared from donors with high titers of antibody against the toxin, making them hyperimmune globulins.
The light chain gene has three gene segments. These include: the light chain variable region (V), joining region (J), and constant region (C) gene segments. The variable region of light is therefore encoded by the rearrangement of VJ segments. The light chain can be either kappa,κ or lambda,λ. This process takes place at the level of mRNAs processing. Random rearrangements and recombinations of the gene segments at DNA level to form one kappa or lambda light chain occurs in an orderly fashion. As a result, "a functional variable region gene of a light chain contains two coding segments that are separated by a non-coding DNA sequence in unrearranged germ-line DNA".
Sources: en.wikipedia.org
39. Pain Physician. 2026 Sep;29(6):E753-E754. In Response to Comment on "Cervical Erector Spinae Plane Block vs. Epidural Steroid Injection for Cervical Radicular Pain: A Clinical Trial". Salehi S(1)(2). Author information: (1)Iran University of Medical Sciences, Tehran, Iran. (2)Department of Anesthesiology and Pain Medicine, Baqiyatallah University of Medical Sciences, Tehran, Iran.
ASQ provides its members with certification, training, publications, conferences, and other services. ASQ is a founding partner of the American Customer Satisfaction Index (ACSI), a quarterly economic indicator. Since 1989, ASQ has administered the annual Malcolm Baldrige National Quality Award. The ASQ also gives the Dorian Shainin Medal, which is awarded annually for the "Development and Application of Creative or Unique Statistical Approaches in the Solving of Problems Relative to the Quality of Product or Service".
== The mechanism of thiol–disulfide exchange between oxidoreductases == The mechanism of thiol–disulfide exchange between oxidoreductases is understood to begin with the nucleophilic attack on the sulfur atoms of a disulfide bond in the oxidised partner, by a thiolate anion derived from a reactive cysteine in a reduced partner. This generates mixed disulfide intermediates, and is followed by a second, this time intramolecular, nucleophilic attack by the remaining thiolate anion in the formerly reduced partner, to liberate both oxidoreductases. The balance of evidence discussed thus far supports a model in which oxidising equivalents are sequentially transferred from Ero1 via a thiol–disulfide exchange reaction to PDI, with PDI then undergoing a thiol–disulfide exchange with the nascent polypeptide, thereby enabling the formation of disulfide bonds within the nascent polypeptide.
Akt resides in the cytosol in an inactive conformation, until the cell is stimulated and it translocates to the plasma membrane. The Akt PH domain has a high affinity for second messenger PI(3,4,5)P3, binding to it preferentially over other phosphoinositides. Thus PI3K activity is essential for translocation of Akt to the membrane. Interaction with PI(3,4,5)P3 causes conformational changes and exposure of phosphorylation sites Thr308 in the kinase domain and Ser473 in the C-terminal domain. Akt is partially activated by phosphorylation of T308 by PDK1. Full activation requires phosphorylation of S473, which can be catalysed by multiple proteins, including phosphoinositide-dependent kinase 2 (PDK2), integrin-linked kinase (ILK), mechanistic target of rapamycin complex complex 2 (mTORC2) and DNA-dependent protein kinase (DNA-PK). The regulation of Ser473 phosphorylation is not fully understood but may also be influenced by autophosphorylation after Thr308 phosphorylation. After stimulation, the levels of PIP3 decrease and Akt activity is attenuated by dephosphorylation by serine/threonine phosphatases.
Creating a CCP involves three steps: initiation, multiplication and mixture. The population then goes into the maintenance phase. A number of lines, generally 7-30, with interesting properties, such as yield or baking quality, are selected and all possible crosses of them are done. If many lines of different genetic background are used, a huge amount of genetic diversity will be present. Seeds from crosses are sown out and harvested separately for a growing season or two until enough seeds are available. All seeds are mixed in equal portions to produce the first CCP generation. The population is grown repeatedly and possibly changes due to natural selection. Each year seeds are saved after harvest, and used as seed for the next growing season. Plants that are successful under the prevailing growing conditions will give more seeds and contribute more to the next generation, compared to less successful plants. Disease will cull susceptible plants and the population will over time become resistant to the common diseases, but only if the initial population has resistance genes present.
Sources: pubmed.ncbi.nlm.nih.gov
Ansuvimab was developed by the Vaccine Research Center with support of the United States National Institutes of Health and the Defense Advanced Projects Agency. The heavy and light chain sequences of ansuvimab mAb were cloned into CHO cell lines to enable large-scale production of antibody product for use in humans. In early 2018, a Phase 1 clinical trial of ansuvimab's safety, tolerability and pharmacokinetics was conducted by Dr. Martin Gaudinski within the Vaccine Research Center Clinical Trials Program that is led by Dr. Julie E. Ledgerwood. The study was performed in the United States at the NIH Clinical Center and tested single dose infusions of ansuvimab infused over 30 minutes. The study showed that ansuvimab was safe, had minimal side effects and had a half-life of 24 days. A license for ansuvimab was obtained by Ridgeback Biotherapeutics in 2018, from the National Institutes of Health-National Institute of Allergy and Infectious Diseases. Ansuvimab was given orphan drug status in May 2019 and March 2020.
Arrestins (abbreviated Arr) are a small family of proteins important for regulating signal transduction at G protein-coupled receptors. Arrestins were first discovered in the late '80s as a part of a conserved two-step mechanism for regulating the activity of G protein-coupled receptors (GPCRs) in the visual rhodopsin system by Hermann Kühn, Scott Hall, and Ursula Wilden and in the β-adrenergic system by Martin J. Lohse and co-workers.
Most drugs are taken orally and are absorbed through the gastrointestinal tract. Antacids would increase the pH environment in the stomach and cause premature release of enteric coated drugs, which are designed to be protected from an acidic environment in stomach. For example, proton-pump inhibitors (PPIs) are enteric coated to protect them from decomposition under an acidic environment. Co-administration of antacids with PPIs would lead to premature release into acidic gastric environments and inactivate PPIs before absorption. These types of pharmacokinetics antagonism should be carefully avoided to prevent loss of drug efficacy. Since most drugs are either weakly acidic or weakly basic, modified pH would also affect the location at which the drug is deionised, thus affecting the required time for absorption and onset.
Calmodulin-like protein 5 is a protein that in humans is encoded by the CALML5 gene. This gene encodes a novel calcium binding protein expressed in the epidermis and related to the calmodulin family of calcium binding proteins. Functional studies with recombinant protein demonstrate it does bind calcium and undergoes a conformational change when it does so. Abundant expression is detected only in reconstructed epidermis and is restricted to differentiating keratinocytes. In addition, it can associate with transglutaminase 3, shown to be a key enzyme in the terminal differentiation of keratinocytes. Human CALML5 genome location and CALML5 gene details page in the UCSC Genome Browser. Overview of all the structural information available in the PDB for UniProt: Q9NZT1 (Human Calmodulin-like protein 5) at the PDBe-KB.
Sources: en.wikipedia.org
Creatine is the base compound, while creatine monohydrate is a solid crystalline form that contains one water molecule per creatine molecule. Once dissolved, the monohydrate dissociates and releases creatine, which can participate in cellular energy metabolism. The monohydrate is the form most commonly used in research and commercial products.
Meat and fish contain creatine, and the human body also synthesizes it from amino acids. The monohydrate form is not a natural food ingredient as such; it is a manufactured crystalline solid that provides creatine after ingestion. Food sources contribute to total body creatine stores alongside endogenous synthesis.
It means the crystal lattice includes one molecule of water for each molecule of creatine. This water is part of the solid's ordered structure, not bulk moisture. The hydrate form influences properties such as solubility, density, and shelf stability.
A sealed container kept at room temperature and away from moisture is typical. Heat and humidity promote conversion to creatinine and can reduce assay values. Long-term storage under dry conditions helps maintain the original crystalline form.